Chers utilisateurs,

Nous rencontrons actuellement des ralentissements sur nos serveurs pouvant impliquer des difficultés à vous connecter à Tahoma.

Nos équipes sont actuellement dédiées à la résolution de ce problème et nous vous tiendrons informés de l’avancement de la situation via ce bandeau d’information.

Veuillez nous excuser pour la gêne occasionnée et nous vous remercions pour votre compréhension.

L’équipe des Yellow’s SOMFY  

Question en attente de réponse

Les sujets Domotique

From Connectivity Kit to Switch

Subject: Replacing Connectivity Kit with TaHoma Switch, unable to reconnect io-homecontrol awning

Hello,

I recently replaced my Somfy Connectivity Kit with a TaHoma Switch. The new Switch has been successfully installed and connected, but I am unable to add my existing motorized awning.

The awning previously worked perfectly with the Connectivity Kit and still works normally using the Somfy remote control. No changes have been made to the motor, remote control, or any other hardware.

I removed the old Connectivity Kit from my installation through the TaHoma app before installing the new Switch.

When trying to add the awning, I repeatedly receive the error message "base_no_products_were_found".

I also tried creating a new io-homecontrol security key through the advanced settings in the TaHoma app. Although the app confirmed that the new key was successfully created, the awning still cannot be detected.

Device details:

  • Old Connectivity Kit: PIN 2128-6179-1115
  • New TaHoma Switch: PIN 2327-4598-1257

I suspect this may be related to the original io-homecontrol security key.

Could you please help me transfer or restore the original io-homecontrol connection from my old Connectivity Kit to the new TaHoma Switch, without resetting or reprogramming the awning motor?

Thank you in advance for your assistance!

Kind regards,

Roger

Roger R.
Roger R.

Roger R.

Niveau
0
11 / 100
points
Consultations
consultée 10 fois
Nombre de réponses
1 réponse
Thème
Domotique
Nom de l'auteur
Roger R.
Date
11 novembre 2026
il y a environ 5 heures
question
q
  • Partager cette question

    Réponses

    Roger R.
    Roger R.

    Roger R.

    Niveau
    0
    11 / 100
    points

    An additional test has now been completed.

    Using my original Somfy Situo 1 io Pure II remote, I entered programming mode by pressing the PROG button. The awning responded with the expected brief movement.

    I then continued the pairing procedure in the TaHoma app, but received the message "No product detected".

    This confirms that the motor responds to the programming command, but the new TaHoma Switch still cannot discover it.

    Could you please check whether the original io security key from my deactivated Connectivity Kit is still available and can be transferred to the new TaHoma Switch?

    I would particularly like to avoid resetting the motor and losing its existing settings.

    Merci

    Nom de l'auteur
    Roger R.
    Date
    réponse
    r

    Ce n'est pas ce
    que vous recherchez
    Posez votre question

    Haut de page